|
|
|
|
![](images/hydraulic_dock_leveler.jpg) |
|
![](images/hydraulic_dock_leveler_drawing.gif) |
|
HED6620
in up position |
|
|
|
|
Total
projection of bumper blocks and bumpers is 18"
on hydraulic
units. |
|
|
|
|
|
|
GENERAL
DESCRIPTION |
|
SIMPLE
MAINTENANCE AND ADJUSTMENTS |
|
|
|
|
|
Bondor
edge-of-dock levelers mount to dock face and
provide a working range of 5" above to 5"
below dock.
The units are offered with mechanical or hydraulic
operation. |
|
Properly
installed and operated, periodic lubrication is
the only routine maintenance. On hydraulic models, a
front mounted control adjusts descent speed. Hydraulic
fluid is commonly available, Dextron II® ATF. |
|
|
|
|
|
Deck
and lip are constructed with high-strength steel
safety tread plate, 5500 psi (or better) minimum yield.
Extended life bumpers are molded of first quality rubber.
Bumper blocks are 5/16" steel with a full length,
re-
inforcing center gusset. Long life hinges include grease
fittings throughout. |
|
INSTALLATION |
|
|
|
|
|
For
an existing dock without a minimum 8" channel,
an
optional ramp approach plate or formed angle from
Bondor is highly recommended. For new construction,
the leveler should be welded to a dock edge channel
which is embedded in concrete and secured by anchoring
hooks as shown. Installation drawings are available. |
|
|
HYDRAULICALLY-OPERATED
MODELS |
|
|
|
|
|
|
Bondor
hydraulically-operated models offer the
convenience and safety of push-button control. Our
hydraulic design is superior for many reasons. It
offers
power extension and retraction. The hydraulic
lip lock
automatically releases upon contact with a trailer or
lip
keepers, and safely yields upon impact from trucks.
(Patents awarded and pending.) Lip and deck
have
separate cylinders. Our exclusive speed control
adjusts
leveler descent speed. |
|
|
|
|
|
|
![](images/hydraulic_dock_leveler_drawing1.gif) |
|
|
|
|
|
SIZE
SELECTIONS |
|
|
|
|
|
|
|
|
|
|
|
|
Bondor's
edge-of-dock levelers are offered in a variety
of sizes to accommodate your specific application. |
|
|
|
|
|
Prices
For "HED" Series Hydraulic Edge of Dock |
Model No |
Deck
Width |
Total
Unit Width |
20,000 CIR |
25,000 CIR |
30,000 CIR |
35,000 CIR |
HED-66 |
66" |
104" |
$2,729 |
$2,780 |
$2,869 |
$2,964 |
WT. |
605# |
620# |
635# |
720# |
HED-72 |
72" |
110' |
$2,805 |
$2,856 |
$2,945 |
$3,041 |
WT. |
635# |
650# |
665# |
750# |
HED-78 |
78" |
116" |
$2,945 |
$2,990 |
$3,079 |
$3,175 |
WT. |
670# |
685# |
700# |
785# |
HED-84 |
84" |
122" |
$3,086 |
$3,137 |
$3,226 |
$3,321 |
WT. |
710# |
725# |
740# |
825# |
|
|
Common
"EOD" Options |
Description |
Price |
17" Lip for Refrigerated Trailers |
$108.38 |
U.S. Post Office Model with 3" Run Off Guards
(HED only) |
$337.88 |
Tapered Lip (Tapered At Sides) |
$108.38 |
Abrasive Deck Surface Over 4 Way |
$223.13 |
Solid Bar Handle for NeverLift |
$31.88 |
Extended Pipe Handle for Neverlift (Standard on
30k & 35k CIR) |
$31.88 |
Low Profile Design (Flat Center Plate) Pallet-Jack
Applications |
$76.50 |
Stainless Steel Hinge Pins |
$286.88 |
Cold Spray Metalized |
Consult Us |
Torsion Spring (Extension Mechanism) DL Series
Only |
N/C |
Recessed EOD with Laminated Bumpers (1 Pair) (In
Lieu of Standard) |
-$30.00 |
Extra Heavy Duty Sliding Bump Block Series Wall
Mounting Bracket (1 Pair) (in lieu of standard) |
$121.13 |
Steel Face Bumpers (1 Pair) (in lieu of standard) |
$89.25 |
No Bumpers / Bumper Blocks (1 Pair) |
-$75.00 |
Special Paint |
Consult Us |
Grey Bump Blocks |
$25.50 |
|
|
Common
"EOD" Accessories |
Model No |
Description |
Price |
DL96 |
Dock Ladder 7"x16"x45" with 36"
dual grab bar built into ladder |
$274.13 |
DL80 |
Dock Ladder 7"x16"x45" with single
grab bar (detached) |
$210.38 |
DOTH9260 |
Trash Can Holders |
$133.88 |
KIT3650 |
Safety Flag |
$76.50 |
|
|
"EOD"
Installation Accessories |
|
Model No. |
Description |
Weight |
Price |
DOTH-3816 |
66" Four-Sided Box Assembly |
235# |
$459.00 |
DOTH-3836 |
72" Four-Sided Box Assembly |
250# |
$484.50 |
DOTH-3851 |
78" Four-Sided Assembly |
265# |
$510.00 |
DOTH-9036 |
Embed Channel 8" x 120" |
156# |
$369.75 |
DOTH-9040 |
Embed Channel 10" x 120" |
175# |
$395.25 |
DOTH-9050 |
Ramp Approach Plate 1/4"x12"x120"
with 'Break', includes Anchor Bolts |
113# |
$382.50 |
DOTH-9051 |
Ramp Approach Plate 1/4"x18"x120"
with 'Break', includes Anchor Bolts |
170# |
$446.25 |
DOTH-9052 |
Ramp Approach Plate 1/4"x24"x120"
with 'Break', includes Anchor Bolts |
226# |
$510.00 |
DOTH-9054 |
Ramp Approach Plate 1/4"x36"x120"
with 'Break', includes Anchor Bolts |
338# |
$624.75 |
DOTH-9055 |
Ramp Approach Plate 3/8"x12"x120"
with 'Break', includes Anchor Bolts |
164# |
$459.00 |
DOTH-9056 |
Ramp Approach Plate 3/8"x18"x120"
with 'Break', includes Anchor Bolts |
246# |
$541.88 |
DOTH-9057 |
Ramp Approach Plate 3/8"x24"x120"
with 'Break', includes Anchor Bolts |
327# |
$618.38 |
DOTH-9058 |
Ramp Approach Plate 3/8"x36"x120"
with 'Break', includes Anchor Bolts |
612# |
$784.13 |
DOTH-9059 |
Ramp Approach Plate 3/8"x48"x120"
with 'Break', includes Anchor Bolts |
897# |
$975.38 |
DOTH-9072 |
Face Plate 1/4"x9"x120" with Anchor
Bolts |
76# |
$267.75 |
DOTH-9073 |
Face Plate 1/4"x12"x120" with Anchor
Bolts |
102# |
$286.88 |
DOTH-9074 |
Face Plate 1/4"x15"x120" with Anchor
Bolts |
127# |
$318.75 |
DOTH-9066 |
Formed Angle 1/4"x8"x10"x120" |
151# |
$363.38 |
DOTH-9067 |
Formed Angle 1/4"x8"x10"x120"
with Break |
151# |
$395.25 |
DOTH-9068 |
Formed Angle 1/4"x12"x14"x120" |
217# |
$414.38 |
DOTH-9069 |
Formed Angle 1/4"x12"x14"x120"
with Break |
217# |
$452.63 |
DKIT-9915 |
Installation Kit-included (4) angles 1/4"x2"x2"x6
& 17 Anchor Bolts |
6# |
$127.50 |
DKIT-9914 |
TOD Install Kit |
|
$127.50 |
DOTH-1003 |
Gray Touch Up Spray Paint |
|
$15.30 |
DOTH-1004 |
Orange Touch Up Spray Paint |
|
$15.30 |
DOTH-2079 |
Anchor Bolts 5/8"x5" (Round Heads) |
|
$6.38 |
|
|
DLM,
Dock Leveler, Dock Levelers, Edge Of Dock Leveler, Edge
Of Dock Levelers, Hydraulic Dock Leveler, Hydraulic
Dock Levelers,
Hydraulic Dock Plates, and Loading Dock Levelers from
your complete source for material handling equipment |
|