LIFTMAT
SERIES FLOOR HEIGHT LIFTS
|
|
|
|
 |
|
 |
|
|
The
LIFTMAT line is an extremely low profile series of lifts. They
are ideally suited for any application where the load is evenly
distributed. Because there is little “section” or thickness to
the legs
and platform, the structure does not respond well to off-center or
eccentric loads. When in any raised position, this machine is not
suitable for any side or hinged end axle loads. A maximum of a
25% end axle load may be applied over the roller end only. |
|
|
|
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
| MODEL |
CAP.
(LBS) |
LOW
HEIGHT |
VERTICAL
TRAVEL |
RAISED
HEIGHT |
STANDARD
(MINIMUM)
PLATFORM |
*OVERSIZE
(MAXIMUM)
PLATFORM |
STANDARD
VOLTAGE |
WEIGHT
(LBS)** |
BASE
PRICE |
OVERSIZED
PLATFORM
PRICE* |
LM2.2-28 |
2,200 |
3-1/8" |
28-3/8" |
31-1/2" |
24"
x 66" |
48"
x 96" |
115/1/60 |
600 |
|
|
|
| **Approximate
w/standard platform *In 6" increments |
| Note:
Detailed application information is required at time of quotation for any
platform over 72’’ long. |
|
| OPTIONS |
|
|
MECHANICAL
30’’ long roller ramp with diamond plate ........................................................................................
Bellows skirting, vinyl, black and yellow
3" pleats (requires min. top size of 32" x 74"), installed
...... |
|
| $1,086.92 |
| N/A |
HYDRAULIC
Additional hydraulic hose...............................................................................................................
Delete power unit and controls ................................................................................. Deduct ....... |
|
| $11.90/ft. |
|
| <$520> |
|
|
ELECTRICAL
Special power unit.
Control panel for 460/3/60 primary ................................................................................................ |
|
| $823.68 |
|
|
| LIFTMAT
APPLICATION CONSIDERATIONS: |
•
The LIFTMAT is not suitable to mount a conveyor of any type.
• This lift is not suitable for washdown applications.
• Loading by hand pallet jack: Remember, to push a load, any load,
up an incline gets more difficult as the
weight increases. It is recommended that when using a hand
pallet jack that the weight be kept to a minimum.
• Longer ramp may be required to reduce the angle of incline for unstable
and low clearance loads.
• When using a pallet jack for off loading, it may be difficult to
reintroduce the forks into the pallet due to the angle
of the ramp. It is recommended that either the pallet jack
be left on the table with the load or a longer ramp be
selected to eliminate this problem.
• The electric power unit is external.
• Air operated power unit is not available.
• 5’ of hydraulic hose is standard, longer lengths at an additional
cost. |
|
|
|
Liftmat Low Profile Lift
Table, Electric Lift Table, Hydraulic Lift Table, Hydraulic Scissor Lifts,
Lift Table, Lift Tables, Portable
Lift Table, Powered Lift Tables, Southworth Lift Table, Tilt Tables, and
Tilters from your source for material handling equipment. |
|
