![](images/mechanical_dock_leveler.jpg) |
|
![](images/dock_leveler_drawing.gif) |
|
DL
115X in up position |
|
|
|
Total
projection of bumper blocks and bumpers is 15"
on mechanical units. |
|
|
|
|
|
|
|
|
|
GENERAL
DESCRIPTION |
|
INSTALLATION |
|
|
|
|
|
Bondor
edge-of-dock levelers mount to dock face and
provide a working range of 5" above to 5"
below dock.
The units are offered with mechanical or hydraulic
operation. |
|
For
an existing dock without a minimum 8" channel,
an
optional ramp approach plate or formed angle from
Bondor is highly recommended. For new construction,
the leveler should be welded to a dock edge channel
which is embedded in concrete and secured by anchoring
hooks as shown. Installation drawings are available. |
|
|
Deck
and lip are constructed with high-strength steel
safety tread plate, 5500 psi (or better) minimum yield.
Extended life bumpers are molded of first quality rubber.
Bumper blocks are 5/16" steel with a full length,
reinforcing center gusset. Long life hinges include
grease
fittings throughout. |
|
|
|
|
|
|
|
![](images/mechanical_dock_leveler_drawing.gif) |
|
|
|
|
|
MECHANICALLY-OPERATED
MODELS |
|
|
|
|
|
|
|
Bondor's
mechanically-operated edge-of-dock levelers are
the largest selling edge-of-dock levelrs in the industry.
Our
dual extension spring lift mechanism offers proven efficiency
and durability. Careful engineering and rugged construction
ensure extended life. Operation is safe and easy. |
|
|
|
|
|
|
|
|
SIMPLE
MAINTENANCE AND ADJUSTMENTS |
|
SIZE
SELECTIONS |
|
|
|
|
|
Properly
installed and operated, periodic lubrication is the
only routine maintenance. On mechanical models,
counterbalance is easily adjustable via nuts located
on the
lifting mechanism. |
Bondor's
edge-of-dock levelers are offered in a variety
of sizes to accommodate your specific application. |
|
|
|
|
Prices |
Model No |
Deck
Width |
Total Unit
Width |
20,000 CIR |
25,000 CIR |
30,000 CIR |
DL-66 |
66" |
104" |
$854.25 |
$886.13 |
$949.88 |
Wt. |
500# |
515# |
530# |
DL-72 |
72" |
110" |
$898.88 |
$943.50 |
$1,039.13 |
Wt. |
525# |
540# |
555# |
DL-78 |
78" |
116" |
$1,032.75 |
$1,083.75 |
N/A |
Wt. |
560# |
575# |
590# |
|
|
|
Common
"EOD" Options |
Description |
Price |
17" Lip for Refrigerated Trailers |
$108.38 |
U.S. Post Office Model with 3" Run Off Guards
(HED only) |
$337.88 |
Tapered Lip (Tapered At Sides) |
$108.38 |
Abrasive Deck Surface Over 4 Way |
$223.13 |
Solid Bar Handle for NeverLift |
$31.88 |
Extended Pipe Handle for Neverlift (Standard on
30k & 35k CIR) |
$31.88 |
Low Profile Design (Flat Center Plate) Pallet-Jack
Applications |
$76.50 |
Stainless Steel Hinge Pins |
$286.88 |
Cold Spray Metalized |
Consult Us |
Torsion Spring (Extension Mechanism) DL Series
Only |
N/C |
Recessed EOD with Laminated Bumpers (1 Pair) (In
Lieu of Standard) |
-$30.00 |
Extra Heavy Duty Sliding Bump Block Series Wall
Mounting Bracket (1 Pair) (in lieu of standard) |
$121.13 |
Steel Face Bumpers (1 Pair) (in lieu of standard) |
$89.25 |
No Bumpers / Bumper Blocks (1 Pair) |
-$75.00 |
Special Paint |
Consult Us |
Grey Bump Blocks |
$25.50 |
|
|
Common
"EOD" Accessories |
Model No |
Description |
Price |
DL96 |
Dock Ladder 7"x16"x45" with 36"
dual grab bar built into ladder |
$274.13 |
DL80 |
Dock Ladder 7"x16"x45" with single
grab bar (detached) |
$210.38 |
DOTH9260 |
Trash Can Holders |
$133.88 |
KIT3650 |
Safety Flag |
$76.50 |
|
|
"EOD"
Installation Accessories |
|
Model No. |
Description |
Weight |
Price |
DOTH-3816 |
66" Four-Sided Box Assembly |
235# |
$459.00 |
DOTH-3836 |
72" Four-Sided Box Assembly |
250# |
$484.50 |
DOTH-3851 |
78" Four-Sided Assembly |
265# |
$510.00 |
DOTH-9036 |
Embed Channel 8" x 120" |
156# |
$369.75 |
DOTH-9040 |
Embed Channel 10" x 120" |
175# |
$395.25 |
DOTH-9050 |
Ramp Approach Plate 1/4"x12"x120"
with 'Break', includes Anchor Bolts |
113# |
$382.50 |
DOTH-9051 |
Ramp Approach Plate 1/4"x18"x120"
with 'Break', includes Anchor Bolts |
170# |
$446.25 |
DOTH-9052 |
Ramp Approach Plate 1/4"x24"x120"
with 'Break', includes Anchor Bolts |
226# |
$510.00 |
DOTH-9054 |
Ramp Approach Plate 1/4"x36"x120"
with 'Break', includes Anchor Bolts |
338# |
$624.75 |
DOTH-9055 |
Ramp Approach Plate 3/8"x12"x120"
with 'Break', includes Anchor Bolts |
164# |
$459.00 |
DOTH-9056 |
Ramp Approach Plate 3/8"x18"x120"
with 'Break', includes Anchor Bolts |
246# |
$541.88 |
DOTH-9057 |
Ramp Approach Plate 3/8"x24"x120"
with 'Break', includes Anchor Bolts |
327# |
$618.38 |
DOTH-9058 |
Ramp Approach Plate 3/8"x36"x120"
with 'Break', includes Anchor Bolts |
612# |
$784.13 |
DOTH-9059 |
Ramp Approach Plate 3/8"x48"x120"
with 'Break', includes Anchor Bolts |
897# |
$975.38 |
DOTH-9072 |
Face Plate 1/4"x9"x120" with Anchor
Bolts |
76# |
$267.75 |
DOTH-9073 |
Face Plate 1/4"x12"x120" with Anchor
Bolts |
102# |
$286.88 |
DOTH-9074 |
Face Plate 1/4"x15"x120" with Anchor
Bolts |
127# |
$318.75 |
DOTH-9066 |
Formed Angle 1/4"x8"x10"x120" |
151# |
$363.38 |
DOTH-9067 |
Formed Angle 1/4"x8"x10"x120"
with Break |
151# |
$395.25 |
DOTH-9068 |
Formed Angle 1/4"x12"x14"x120" |
217# |
$414.38 |
DOTH-9069 |
Formed Angle 1/4"x12"x14"x120"
with Break |
217# |
$452.63 |
DKIT-9915 |
Installation Kit-included (4) angles 1/4"x2"x2"x6
& 17 Anchor Bolts |
6# |
$127.50 |
DKIT-9914 |
TOD Install Kit |
|
$127.50 |
DOTH-1003 |
Gray Touch Up Spray Paint |
|
$15.30 |
DOTH-1004 |
Orange Touch Up Spray Paint |
|
$15.30 |
DOTH-2079 |
Anchor Bolts 5/8"x5" (Round Heads) |
|
$6.38 |
|
|
DLM,
Dock Leveler, Dock Levelers, Edge Of Dock Leveler, Edge
Of Dock Levelers, Loading Dock Leveler, Loading Dock
Levelers,
Mechanical Dock Leveler, and Mechanical Dock Levelers
from your complete source for material handling equipment. |
|