| OPERATION
PROCEDURE |
|
|
|
|
|
|
|
|
|
|
|
Bondor
NEVERLIFT is the easiest to operate of all lever-operated
dock levelers in America today. Each
NEVERLIFT model comes with a ball-tipped steel lever.
With the lever in the operating slot, the operator simply
pulls
the lever to a position that is approximately 50°
away from dock edge. This lifts the deck and lip. Next,
the operator
returns the lever to its original vertical position.
This extends the unit outward and allows it to rest
in the trailer. There's
absolutely no required back bending, no lifting, no
difficult push toward the dock edge, and no leaning
over the dock
edge. Just pull back, then return to the original position.
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
First,
pull back on the lever
to the 2 o'clock postion,
approximately 50° away
from dock edge. |
Then,
return the lever to
the 12 o'clock position.
That's all it takes. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SIZE
SELECTIONS |
|
INSTALLATION |
|
|
|
|
|
|
|
|
|
|
|
Bondor's
edge-of-dock levelers are offered in a variety
of sizes to accommodate your specific application. |
|
For
an existing dock without a minimum 8" channel,
an
optional ramp approach plate or formed angle from
Bondor is highly recommended. For new construction,
the leveler should be welded to a dock edge channel
which is embedded in concrete and secured by anchoring
hooks as shown. Installation drawings are available. |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
Total
projection of bumper blocks and bumpers is 15". |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Prices
"NL" Series NeverLift Edge of Dock Leveler
(Lever Model) |
|
Model No |
Deck
Width |
Total
Unit Width |
20,000 CIR |
25,000 CIR |
30,000 CIR |
35,000 CIR |
|
NL-66 |
66" |
104" |
$931 |
$975 |
$1,141 |
$1,224 |
|
Wt. |
515# |
530# |
545# |
630# |
|
NL-72 |
72" |
110" |
$956 |
$1,007 |
$1,154 |
$1,269 |
|
Wt. |
545# |
560# |
570# |
655# |
|
NL-78 |
78" |
116" |
$1,097 |
$1,141 |
$1,269 |
$1,466 |
|
Wt. |
580# |
595# |
605# |
690# |
|
NL-84 |
84" |
122" |
$1,383 |
$1,447 |
$1,505 |
$1,721 |
|
Wt. |
620# |
635# |
645# |
730# |
|
|
|
| Common
"EOD" Options |
|
Description |
Price |
|
17" Lip for Refrigerated Trailers |
$108.38 |
|
U.S. Post Office Model with 3" Run Off Guards
(HED only) |
$337.88 |
|
Tapered Lip (Tapered At Sides) |
$108.38 |
|
Abrasive Deck Surface Over 4 Way |
$223.13 |
|
Solid Bar Handle for NeverLift |
$31.88 |
|
Extended Pipe Handle for Neverlift (Standard on
30k & 35k CIR) |
$31.88 |
|
Low Profile Design (Flat Center Plate) Pallet-Jack
Applications |
$76.50 |
|
Stainless Steel Hinge Pins |
$286.88 |
|
Cold Spray Metalized |
Consult Us |
|
Torsion Spring (Extension Mechanism) DL Series
Only |
N/C |
|
Recessed EOD with Laminated Bumpers (1 Pair) (In
Lieu of Standard) |
-$30.00 |
|
Extra Heavy Duty Sliding Bump Block Series Wall
Mounting Bracket (1 Pair) (in lieu of standard) |
$121.13 |
|
Steel Face Bumpers (1 Pair) (in lieu of standard) |
$89.25 |
|
No Bumpers / Bumper Blocks (1 Pair) |
-$75.00 |
|
Special Paint |
Consult Us |
|
Grey Bump Blocks |
$25.50 |
|
|
| Common
"EOD" Accessories |
|
Model No |
Description |
Price |
|
DL96 |
Dock Ladder 7"x16"x45" with 36"
dual grab bar built into ladder |
$274.13 |
|
DL80 |
Dock Ladder 7"x16"x45" with single
grab bar (detached) |
$210.38 |
|
DOTH9260 |
Trash Can Holders |
$133.88 |
|
KIT3650 |
Safety Flag |
$76.50 |
|
|
| "EOD"
Installation Accessories |
|
|
Model No. |
Description |
Weight |
Price |
|
DOTH-3816 |
66" Four-Sided Box Assembly |
235# |
$459.00 |
|
DOTH-3836 |
72" Four-Sided Box Assembly |
250# |
$484.50 |
|
DOTH-3851 |
78" Four-Sided Assembly |
265# |
$510.00 |
|
DOTH-9036 |
Embed Channel 8" x 120" |
156# |
$369.75 |
|
DOTH-9040 |
Embed Channel 10" x 120" |
175# |
$395.25 |
|
DOTH-9050 |
Ramp Approach Plate 1/4"x12"x120"
with 'Break', includes Anchor Bolts |
113# |
$382.50 |
|
DOTH-9051 |
Ramp Approach Plate 1/4"x18"x120"
with 'Break', includes Anchor Bolts |
170# |
$446.25 |
|
DOTH-9052 |
Ramp Approach Plate 1/4"x24"x120"
with 'Break', includes Anchor Bolts |
226# |
$510.00 |
|
DOTH-9054 |
Ramp Approach Plate 1/4"x36"x120"
with 'Break', includes Anchor Bolts |
338# |
$624.75 |
|
DOTH-9055 |
Ramp Approach Plate 3/8"x12"x120"
with 'Break', includes Anchor Bolts |
164# |
$459.00 |
|
DOTH-9056 |
Ramp Approach Plate 3/8"x18"x120"
with 'Break', includes Anchor Bolts |
246# |
$541.88 |
|
DOTH-9057 |
Ramp Approach Plate 3/8"x24"x120"
with 'Break', includes Anchor Bolts |
327# |
$618.38 |
|
DOTH-9058 |
Ramp Approach Plate 3/8"x36"x120"
with 'Break', includes Anchor Bolts |
612# |
$784.13 |
|
DOTH-9059 |
Ramp Approach Plate 3/8"x48"x120"
with 'Break', includes Anchor Bolts |
897# |
$975.38 |
|
DOTH-9072 |
Face Plate 1/4"x9"x120" with Anchor
Bolts |
76# |
$267.75 |
|
DOTH-9073 |
Face Plate 1/4"x12"x120" with Anchor
Bolts |
102# |
$286.88 |
|
DOTH-9074 |
Face Plate 1/4"x15"x120" with Anchor
Bolts |
127# |
$318.75 |
|
DOTH-9066 |
Formed Angle 1/4"x8"x10"x120" |
151# |
$363.38 |
|
DOTH-9067 |
Formed Angle 1/4"x8"x10"x120"
with Break |
151# |
$395.25 |
|
DOTH-9068 |
Formed Angle 1/4"x12"x14"x120" |
217# |
$414.38 |
|
DOTH-9069 |
Formed Angle 1/4"x12"x14"x120"
with Break |
217# |
$452.63 |
|
DKIT-9915 |
Installation Kit-included (4) angles 1/4"x2"x2"x6
& 17 Anchor Bolts |
6# |
$127.50 |
|
DKIT-9914 |
TOD Install Kit |
|
$127.50 |
|
DOTH-1003 |
Gray Touch Up Spray Paint |
|
$15.30 |
|
DOTH-1004 |
Orange Touch Up Spray Paint |
|
$15.30 |
|
DOTH-2079 |
Anchor Bolts 5/8"x5" (Round Heads) |
|
$6.38 |
|
|
DLM,
Dock Leveler, Dock Levelers, Edge Of Dock Leveler, Edge
Of Dock Levelers, Loading Dock Leveler, Loading Dock
Levelers,
Mechanical Dock Leveler, and Neverlift from your complete
source for material handling equipment. |
|
Dual extension spring lift mechanism.